PRODUCT DETAILS
Ideal for
- outdoor showers
- washing articles
- pets
- and many other uses
Colour - grey - NCS700N
Note the following features:
- complete with shower head assembly and fixing screws
- good security - no connector, no flow
- push and turn activation
- innovative, attractive design
- high quality for a long reliable life
- compact
- lightweight
- easy to fit - requires 60mm cutter
- non return valves are fitted to each inlet
- 1.5m long shower hose - but this can be lengthened - see below
- longer shower head assemblies are now available as extras - 2.0 m long (SP6088U) and 2.5 m long (SP6088AA)
- swivel head with fixed pattern spray with lever control
- high flow rate
- nett weight with shower head assembly - 740g
The External shower point comes complete with a Shower head assembly (shower fitting, shower hose and swivel head). It uses the unit�s existing hot and cold water supplies. Inserting the shower assembly, locks it in place and turns on the water. Temperature adjustment by turning the assembly.
You will need a 60mm cutter to create the orifice.
Inlet connections for hot and cold water - you will need Whale quick connect plumbing system fittings, size 15mm - we recommend Equal elbow item code WX1503(B) or Equal straight WX1504(B) or similar. John Guest Speedfit work well too.
We supply 4 fixing screws.
In winter take care to drain down the shower unit to prevent damage from freezing water - it is therefore good to put isolation valves onto the feeds.
Permanent Buildings If fitting to a permanent building there is a requirement for additional non return valves on the hot and cold feeds to prevent back siphonage. Please take advice from a fittings supplier. If the wall is thicker than 40mm then cut the 60mm dia hole to a depth of 40mm from the outside and then cut a larger hole (probably in excess of 80mm dia) to meet the 60mm hole from the inside. This is to allow the connections to be fitted and accessed.
For microswitch activated water systems you will need to install a switch for the pump for the Shower Point. We suggest an illuminated switch just inside the door to remind the user to switch the pump off when the Shower Point is not being used.
For On demand pressure pumped water systems the Shower Point can be installed as it is, without the need for a electrical switch.
Different Shower Head. If you want a different shower head, most domestic Shower Heads will fit onto the hose assembly supplied. A head that looks good can be found on Amazon by clicking here .
To extend the length of the hose - Longer Shower Head assemblies are now available as extras - 2.0 m long (SP6088U) and 2.5 m long (SP6088AA)
You can lengthen the hose using a 1/2in BSP Nipple eg BES Brass Nipple part 6576 or Philmac 90421100 or equivalent and a standard shower hose with 1/2in BSP fittings. The image below shows what is required. Take care not to lose the washers.
RETURNS & REFUND POLICY
RETURNS & REFUND POLICY
Delivery Policy
South West Leisure Spares will dispatch your item within 1-3 working days, if a part purchased is out of stock you will be notified of the delay whilst we reorder.
Returns Policy
We understand that you may need to return an item to us. South West Leisure Spares offer a quick and easy returns process. Please be aware we can't process any return or exchange if you have not provided your invoice number.
Refund Policy
All parts have a 14 day full refund policy providing we have been notified before the item is sent back to us. If you are not 100% satisfied with your purchase, simply send it back and we'll refund the full cost of the item minus the shipping costs.
Please check your part for damages as soon as you receive it. All goods retuned must be in new condition without any damages unless stated otherwise and must be fit for resale.
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will notify you on the status of your refund after inspecting the item.
Once approved, we will initiate a refund to your original method of payment.
Please Note: Goods returned must be sent signed for and insured by you against loss or damage. Only damaged parts will have a full refund and return postage paid for.
Your item must be returned in it’s original packaging.
Damages, shortages & incorrect items must be reported within 48 hours of you receiving order, otherwise no claim will be considered by us or the carrier. Special/bespoke orders cannot be cancelled or refunded once ordered, as these parts are being made to order and have to be paid for.
It is your responsibility to check the delivery has not been damaged in transit. If it is damaged please refuse delivery or make sure it is noted on confirmation of delivery before you sign. Please notify us within 48 hours or your claim will not be valid.
Please return any unwanted or damaged parts to:
South West Leisure Spares,
Unit 1 Southfields Enterprise Park,
Jordans Road,
Ilminster,
Somerset,
Reviews
Q&A
Bullfinch Electric Outlet P...Bullfinch External Shower Point Grey
Delivery Policy
South West Leisure Spares will dispatch your item within 1-3 working days, if a part purchased is out of stock you will be notified of the delay whilst we reorder.
Returns Policy
We understand that you may need to return an item to us. South West Leisure Spares offer a quick and easy returns process. Please be aware we can't process any return or exchange if you have not provided your invoice number.
Refund Policy
All parts have a 14 day full refund policy providing we have been notified before the item is sent back to us. If you are not 100% satisfied with your purchase, simply send it back and we'll refund the full cost of the item minus the shipping costs.
Please check your part for damages as soon as you receive it. All goods retuned must be in new condition without any damages unless stated otherwise and must be fit for resale.
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will notify you on the status of your refund after inspecting the item.
Once approved, we will initiate a refund to your original method of payment.
Please Note: Goods returned must be sent signed for and insured by you against loss or damage. Only damaged parts will have a full refund and return postage paid for.
Your item must be returned in it’s original packaging.
Damages, shortages & incorrect items must be reported within 48 hours of you receiving order, otherwise no claim will be considered by us or the carrier. Special/bespoke orders cannot be cancelled or refunded once ordered, as these parts are being made to order and have to be paid for.
It is your responsibility to check the delivery has not been damaged in transit. If it is damaged please refuse delivery or make sure it is noted on confirmation of delivery before you sign. Please notify us within 48 hours or your claim will not be valid.
Please return any unwanted or damaged parts to:
South West Leisure Spares,
Unit 1 Southfields Enterprise Park,
Jordans Road,
Ilminster,
Somerset,